 Replacement Safety Pads
If you know the make, model and size of your trampoline, simply
telephone us (Auckland 09 410 4400) or email us on info@apextrampolines.co.nz with the details so we can make your new side and end safety pads or supply you with a quote.
If you dont know those details please contact us with the following:
Rectangular tramps
- Measure the length and width of the tramp from the outside edge of the tramp frame and count the number of springs down one side and across one end.
- Let us know if your tramp has diagonal corner springs.
- Measure the length and width of the black mat.
- Measure the length of a spring tip to tip including the hooks when it is off the tramp and in a relaxed state.
Please note: most rectangular tramps do not have diagonal corner springs. When this is the case safety pads do not extend over the corner areas as there are no springs to support a pad. Some models (not all) can have optional elbow shaped corner pads which cover the frame only in the corners. If you wish we can send a photo.
If your trampoline does have diagonal corner springs, safety pads can most likely be made to extend over the corner areas. Call us.
Circular Tramps
- Measure the diameter of the tramp taken from the outside edge of the tramp frame.
- Measure the diameter of the black mat.
- Count the total number of springs. Please take care with this - it is easy to miscount.
- Measure the length of a spring tip to tip including the hooks when it is off the tramp and in a relaxed state.
Octagonal Tramps
- Measure the diameter of the tramp from a flat side across the tramp to the opposite flat edge. Measure from the outside edge of the frame.
- Measure the diameter of the black mat (flat side to opposite flat side).
- Count the total number of springs and count the number of springs on one of the flat sides.
- Measure the length of a spring tip to tip including the hooks when it is off the tramp and in a relaxed state.
Side and end Safety Pads do not extend over the corner areas when there are no springs to support the pad; if they did they would simply be hiding a 'hole' which would collapse if a child sat or stood there. Phone us and we can quote over the phone.
Corner Pads
Elbow-shaped corner pads ($130.00) that cover the frame only in the corner are available for some larger rectangular trampolines.
Side and end Safety Pads for rectangular trampolines usually range in price from $210.00 for a smaller tramps to $695.00 for very large models. Circular and octagonal safety pads are usually around $430.00 to $455.00. Phone us and we can quote over the phone.
Colour Choice
Safety pads are available in two colours (please use colour swatches
as an indication only):
 |
Royal Blue
A lovely rich royal blue about the same
colour as BNZ blue. |
 |
 |
Forest Green
Our most popular colour, it blends in well
in a garden setting. |
PLEASE NOTE:
Apex Trampolines can only manufacture your new side and end safety pads correctly if
you give us the correct dimensions. Please take time and be careful with your measuring. Use the type of measurement you are most familiar with - metric or imperial
are both fine by us. If in doubt, please call us for advice.
If you are uncertain please phone us on Auckland (09) 410 4400, or email: info@apextrampolines.co.nz.
|
